SONY FS5 – Streaming en Youtube y Facebook usando VLC y OBS
Hi there! I'm Dani from Peaking Tomatoes and in thisvideo let's see how to configure both camera as a computer to streamon Youtube and Facebook In this
case, we are going to use the FS5 since it has a transmission mode via wifi or cable Before we start, we first have to haveof course how is the method that we are going to use.The method we are going to use is a combinationof two programs, VLC Player and OBS Studio, We will connect the camera via wifi or cableto the same network where our computer is, once the connection is established we will useVLC to capture the signal and OBS to send said signal to the youtube servers orFrom Facebook.
The first thing is to know what IP our computer has, or the equipment where we are going to carry out the streaming.
In MAC, we will have to go to System Preferences, network, if we are wired, we should Get out of the IP address here, and if we'reconnected to a WIFI, we must access Advanced and in the TCP IP tag we will find ourIP In WINDOWS we can search for CMD and open it, thenwe write ipconfig and the ip that we have, we must write down the one that is IPV4.
The next thing is to configure the camerato stream.
To do this, we press the MENU button.
And we are going to ADJUST NETWORK:WIFI CONFIGURATION But first we check that it is NOT activatedAIRPLANE mode In WIFI configuration, we access configurationaccess point The camera will start searching for available Wi-Fi networksand we select the wifi network where we want connect.
The red has to be the same aswhere our computer is.
In this case I already have the Wi-Fi ofmy house, but if not, we will only need than entering the password, The next thing is to configure the addressIP on the camera, we can put it manually, in this case we will have to know masksubnet and gateway, and an address IP to be free.
Or we can leave it on automatic, todaymost routers and switches have the DHCP activated, and gives a form addressautomatic.
The next point is the priority connection, we are going to activate it, to avoid that in case if there are more wifi networks, do not change oneto another Click on OK, and wait for it to connect.
We can also connect the camera by cableethernet, for this, like wifi, we will have to configure the IP, in manualor automatic, in my case, I have a fixed IP to perform this test.
We return to the ADJUST NETWORK submenu, and accessone stream In this new menu, we can configure 3different routes, in case we usually do streaming on different networks or computers, to have it and saved.
In this case, we select PRESET1, We enter Destination Configuration.
This is where we have to put the addressIP of the computer where we are going to perform the streaming on youtube or facebook.
As you can see, I already have saved the ip and portfrom my computer but it can be changed in any moment.
We write the ip of our team.
And alsothe port, in this case it will ALWAYS be 1234.
We give it an OK, and we already have the data savedin PRESET1 Another option we have is the resolutionof streaming, when the camera is capable 4K and 1080p, for streaming video, the maximumit will be HD, 1280×720 or lower.
Now that we have configured the destinationstreaming, we can start.
We select which setting we want to use, in this case the1, and then click on EXECUTE Now we will have to choose between connectionWIFI or cable, in case of wifi connection We hope that the WIFI option is activatedand click on it.
We let the camera prepare the setupstreaming.
We will see that a symbol appears in the parttop, indicating that the camera is ready to get started.
If we want to get out of this mode, we will havethan press the MENU button, and if we want to start the video transmission, we will press the buttonMINIATURE.
Keep in mind that until we pressthis button, the camera will not send any signal Once THUMBNAIL is pressed, we will see how theicon changes, indicating that the camera is already streaming.
The camera allows recording during transmission, in case we want to save the content in a card.
In this mode, some buttons on thecamera are disabled, although yes we can change the diaphragm with its dial, or activate the neutral density filter, change speed, gain, etc.
When we want to end streaming, we will have to press THUMBNAIL again and in case you want to exit streaming mode, we press the MENU button.
In case we use cable connection, click on LAN with CABLE When the connection is established, it is necessarythis icon at the top As with the WIFI connection, aOnce the camera is ready to perform streaming, the STRM icon appears, we will pressthe THUMBNAIL button to start and stop the streaming, just like in wifi mode, To be able to stream on YouTube andFacebook we will need, a part of accounts registered in each of the portals (andapproved! ) two video programs, both free, and both for Windows, Mac, and Linux.
The first of them is VLC Player, which apartof being an excellent video player, allows us to collect the signal from the cameravia wifi or lan.
We just have to go to google, searchVLC and download the corresponding version for our operating system.
The next program is OBS Studio, whichserves to send the video signal to YouTube and Facebook among others.
We will also go to google, look for OBS Studio, and enter your website to download the version Once both programs are installed, we startVLC first.
We can click on OPEN MEDIA or go to the menuFILE and OPEN NETWORK Here we will have to put where it has tocollect the transmission signal.
We will OPEN RTP UDP BROADCAST, We mark UPD and UNIDIFUSIÓN and put asport 1234.
And click on open Now we already have the UDP route from where we will receiveStreaming.
The next point is to save the list ofreproduction, for this we go to FILE, SAVE LIST.
In this case we keep it inthe desk to have it at hand.
At this point, we can test whether the signalvideo comes to us, for this, we turn the camera and activate the streaming mode.
If everything is ok, in VLC you will see the imageof the camera.
Whether we have performed the test, or whetherno we must close VLC The next step is to configure OBS By default we have already created a scene, we can create another one or use it.
The next thing is to create a new font, press the MAS and then VLC VIDEO SOURCE We create the new VLC source, with the namethat we like the most or leave it as is.
And now it's time to add the listof reproduction that we created previously in VLC.
If we have done everything right, we should seeand to the video signal within OBS, we can enlarge the video to fill the frameif we are not going to add more sources or content to the broadcast.
Record that if we have VLC open, the signalis not going to make it to OBS, even if we have everything correctly we have to close VLC toreceive the signal.
Ok, now we have configured both thecamera, like VLC and OBS to receive the signal, the next point is to configure both OBSlike YouTube to stream.
First step is to go to the youtube channel whereperforms the director.
And click on the symbol from the camera above, and then LIVE By default it is the webcam, that's why it gives us theerror that you cannot find a camera, we must click on ISSUE We write a title, if we want it to bepublic, private, A description, and if we are going to program theemission or not.
When we have everything, click on CREATE EMISSION Now we need the issue key, fordefault skip the window so we can copy it, we also have the server URLfrom youtube, but we will not need it, since OBS already has a configuration for youtube.
We copy the key.
Important, do not shownever give that key to other people, because anyone could do live onthat channel12000:10:19, 130 –> 00:10:24, 490Next will be an OBS, SETTINGSISSUE, we select YOUTUBE as a service.
And we copy the key that we have.
The next thing will be to START TRANSMISSION inOBS We close this window now, and wait foryoutube will receive our streaming It usually takes 10 to 30s until we see somethingon screen, and as you can see, there will always be certain latency between video source and director.
At this point we are ready to startthe director on youtube, for this click on the blue button ISSUE ISDIRECT To finish, we will press FINISH ISSUEon youtube and don't forget then stop streaming in OBS and logically on camera.
To make a director on Facebook, we will haveto be on our page, create LIVE Like YouTube, we are going to need akey, we copy it and go back to OBS We enter SETTINGS:ISSUE And we select FACEBOOK and copy the key.
We start Transmission, and we wait forthe signal reaches Facebook Like youtube, we can see differentgraphics about our director Click on TRANSMIT and again we arein the air.
To finish, click on FINISH VIDEOLIVE, and again finish streaming on OBS and on our camera.
Well these are the steps to follow to makestreaming on YouTube or Facebook using an FS5.
You can find the links to the programsUsed in the video description.
If you have any doubts or questions, please leavea comment! And so far the tutorial on streaming, If you have any questions you can leave a commentary.
Until the next video!.
Nhận xét
Đăng nhận xét